It will be a long slow process, but I'm going to try to document the building of my FF machine on this page.

The machine will be built round a folded aerolam tub, with a cradle under and partly round the engine, continuing into a triangular cross-section box containing the fuel tank and carrying the seat, sweeping up at the rear into a backrest bulkhead, with the swinging arm pivoting at the back of the central box. A tunnel will be formed through the box containing an extension drive shaft. The machine will be about 10 inches longer than standard.

The first two drawings attached show the Hossack style front fork, and the main aerolam spar of the fork as a developed sheet ready to be cut. The drawings are all but finished, and will shortly be going for quotation for NC milling with an old client who has machines capable of cutting the job. It is possible to cut four sets of uprights from an 8x4 sheet of material, so I will have three spare sets that I may offer to the group.